Výsledky hledání pro

Pins - Česká Republika

4 Podniky

4 Produkty

JEZZAN MANUFACTURER

Česká republika

We specialize in manufacturing kenzans - flower holders used for floral arrangement. Our kenzans are different from the traditional ones in their pin thickness, pin spacing and in the material used for the base. They are suitable for arranging with soft and woody stems. However when arranging with woody stems you need to keep in mind, the ends need to be always softened. It is not recommended to stick the raw woody stems directly on the pins. The key for better arranging experience beside traditional kenzan are the thinner pins, which diameter is only 1mm. Thanks to it there are more pins on the same area, which leads to better fixation and lower damage of the stem. The second aspect is our own alloy used for the production. It has lower ratio of lead, so it's harder and the pins don't wobble in the base even after many uses. Moreover it's more resistant to oxidation and limescale. Our family company has been operating on the Czech market since 2021. We offer 5 different diameters of round kenzans with stainless steel pins - 37mm, 54mm, 72mm, 91mm and 103mm. We produce kenzans with two different spacing between the pins - 1, 2mm and 2, 0mm. The high of base is 10mm and the lengh of pins 15mm. Each peace is handmade, grinded and polished.

Všechny produkty odpovídající "pins"

KENZAN 91mm (3,58in)

KENZAN spring 37mm (1,46in)

KENZAN 103mm (4,06in)

KENZAN 54mm (2,15in)

Zobrazit všechny produkty
RNDR.JIRI MAREK CSC.

Česká republika

Společnost RNDR.JIRI MAREK CSC., je Velkoprodejce, která působí v Obchodní zástupci pro dovoz a vývoz sektoru. Působí rovněž v sektorech Kolíky a čepy normalizované, Kola a kolečka pro manipulaci se zbožím, Kola a kolečka pro průmyslové vozíky, Kolíky a čepy normalizované, Kola a kolečka pro manipulaci se zbožím, a Kola a kolečka pro průmyslové vozíky. Sídlí v Brno-Sever, Česká republika.
WOLFGANG HABERMANN

Česká republika

Společnost WOLFGANG HABERMANN, je Výrobce, která působí v Špendlíky - potřeby pro oblečení sektoru. Sídlí v Lubník, Česká republika.
MODYMA

Česká republika

Are you looking for experienced machine parts producer in central Europe who works for a reasonable price? The Czech company MODYMA specializes in production of machine parts by chip machining from technical plastics such as APA, PP, PET, PTFE and others. We process composite and electrical insulation materials such as glasstextite, textite, kartite, pertinax and carbon. We also machine all structural steels, alloys of aluminum, copper, brass and other non-ferrous metals and also special materials such as HADROX, INCONEL, titanium for OEM manufacturers in the whole Europe. In order to improve the appearance or anti-corrosion properties of the finished parts, we offer to our clients surface treatment of the parts produced by us. The most common finishes are: anodizing, nickel/chrome plating, galvanizing, blackening, varnishing. Our other activity is carrying out of assembly and completion of smaller assemblies and sub-assemblies in our own premises. We press positioning pins, press nuts, etc. on manual presses. The main task of the assembly workshop is the assembly, completion and testing of assemblies from parts manufactured using our own technologies.

Zobrazit všechny produkty

Filtry

Výsledky hledání pro

Pins - Česká Republika

Počet výsledků

4 Podniky